High-Performance Solvent Dispersant for Tank Cleaning & Heavy Hydrocarbon Removal
Maverick is a low foaming, high-performance solvent dispersant blend designed for tank cleaning and removal of heavy hydrocarbon deposits including paraffin wax, asphaltenes, bitumen, and sludge. Engineered for oilfield and industrial systems, it rapidly penetrates, softens, and mobilizes deposits while keeping contaminants dispersed for efficient removal.
Unlike conventional solvents that dissolve deposits but allow re-deposition, MAVERICK combines solvency, surfactant wetting, and dispersant technology to break adhesion and maintain suspended solids during cleaning operations. This makes it highly effective for tank cleaning, vessel clean-outs, and circulation-based deposit removal.
MAVERICK is formulated with a high flash point solvent system, allowing for safer handling and use in heated cleaning applications compared to conventional light hydrocarbon solvents. This enables operators to apply heat during tank cleaning and circulation processes to improve penetration, reduce cleaning time, and enhance overall deposit removal efficiency.
Built for Tank Cleaning & Batch / Clean-Out Applications
MAVERICK is engineered for systems affected by:
- paraffin wax buildup
- asphaltene deposition
- bitumen and heavy oil fouling
- sludge accumulation in tanks and vessels
- restricted flow due to hydrocarbon solids
These deposits commonly result from temperature changes, pressure drops, and fluid incompatibility, leading to reduced system efficiency and increased maintenance requirements.
Designed for Turn-Around Cleaning Operations
MAVERICK is widely used in tank cleaning and turn-around chemistry programs, where vessels, separators, and process systems require deep cleaning during scheduled maintenance.
Its ability to be applied neat or circulated in solution allows operators to:
- perform full tank clean-outs without excessive mechanical intervention
- mobilize heavy hydrocarbon deposits for pump-out or flushing
- reduce cleaning time during shutdowns
- restore system capacity and flow efficiency
How Maverick Works (Solvent + Dispersant Action)
MAVERICK removes deposits through a combined mechanism:
- Solvent system penetrates and softens wax, asphaltenes, and bitumen
- Surfactants improve wetting and break adhesion to metal surfaces
- Dispersants suspend mobilized material to prevent re-deposition
Result: deposits are not just dissolved — they are lifted, dispersed, and carried out of the system
This is critical in tank cleaning and circulation applications where redeposition can cause downstream fouling.
Product Features
- High Flash Point Solvent System – Safer to handle and suitable for heated cleaning applications
- Extended Contact Time – Slower evaporation improves dwell time on heavy deposits
- Low Odour & Reduced Volatility – Better for enclosed tank and vessel cleaning environments
- Non-Chlorinated Formula – Safer alternative to traditional aggressive solvents
- Water-dispersible – Improves accessibility for circulation and flushing applications
- Low-foaming Formulation – Allows to be used in most systems with the best overall system compatibility
Applications
MAVERICK is ideal for:
- Tank cleaning and vessel clean-outs
- Separator and production equipment cleaning
- Asphaltene and paraffin removal from process systems
- Pipeline and flowline cleaning
- Heat exchanger and fouled equipment cleaning
- Oilsands and heavy oil operations
- Circulation cleaning in closed-loop systems
MAVERICK can also be used in combination with other cleaning systems such as GOOSE to enhance iron sulfide deposit removal and improve overall cleaning performance in complex systems.
How to Use
Batch / Tank Cleaning Applications
- Apply MAVERICK neat for heavy or tenacious deposits
- Allow sufficient contact time for penetration and softening
- Agitate or circulate where possible to improve cleaning efficiency
- Remove mobilized material by pump-out or flushing
Circulation Cleaning Applications
Unlike low flash point solvents that cannot be safely heated, MAVERICK can be used in heated circulation cleaning programs, allowing operators to significantly improve cleaning performance without increasing flash off and fire risk.
- Dilute MAVERICK at 3–10% by volume in water
- Circulate through system using existing pumps or cleaning equipment
- Apply at temperatures between 40°C and 95°C for improved performance
- Continue circulation until deposits are fully broken down and suspended
- Flush system thoroughly after cleaning
Important Notes
- Heating significantly improves penetration and cleaning efficiency
- Low-foaming formulation is suitable for circulation systems
- Product remains active when dispersed in water
- Concentration and contact time should be adjusted based on deposit severity
Available Packaging
18.9L Pail
205L Drum
FAQ
Why use Maverick for tank cleaning over tradition methods?
Traditional cleaning methods:
- rely heavily on mechanical removal
- struggle with asphaltenes and bitumen
- allow redeposition during cleaning
MAVERICK provides:
- chemical penetration of heavy deposits
- controlled dispersion of contaminants
- improved removal efficiency during circulation or flushing
Combined with its high flash point and low volatility, MAVERICK delivers a safer, more controlled cleaning process that performs consistently in demanding tank and turn-around environments.
Can Maverick be used with other cleaning products?
Yes, MAVERICK can be used alongside complementary systems such as GOOSE to enhance cleaning performance depending on application requirements.
What is the best chemical for tank cleaning heavy hydrocarbons?
A solvent dispersant system like MAVERICK is ideal because it both dissolves and disperses paraffin, asphaltenes, and bitumen, allowing contaminants to be removed during cleaning.
Can Maverick be used in circulation cleaning systems?
Yes, MAVERICK can be diluted and circulated through systems to remove internal hydrocarbon buildup without requiring full disassembly.
Similar Products
Dynafrost – Inhibited Propylene Glycol Based Heat Transfer Fluid
F.U.G.G. – Degreaser For Unsightly Grease & Grime
DynaSol HD – Heavy Hydrocarbon & Asphalt Industrial Degreaser
